Policy Classification Configuration Command Set
Configuring Policy Profiles
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-13
8.3.1.8 set port tci overwrite
Use this command to enable or disable the TCI overwrite function on one or more ports. When
enabled, this allows policy rules to overwrite user priority and other classification information in
the VLAN tag’s TCI field. It will also overwrite ingressing frames tagged to a port VLAN and
policy assignment, if a policy has not already been assigned.
set port tcioverwrite port-string {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable TCI overwrite on port fe.1.3:
port-string Specifies port(s) on which to enable or disable the TCI
overwrite function.
enable | disable Enables or disables the TCI overwrite function.
Matrix(rw)->set port tcioverwrite fe.1.3 enable
To Next Page
Loading...
Need help?
General