Security Configuration Command Set
Configuring MAC Authentication
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-95
14.3.7.14 set macauthentication portreauthenticate
Use this command to force an immediate reauthentication of the currently active sessions on one or
more MAC authentication ports.
set macauthentication portreauthenticate port-string
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to force ge.2.1 though 5 to reauthenticate:
port-string Specifies MAC authentication port(s) to be reauthenticated.
For a detailed description of possible port-string values,
refer to Section 4.1.1.
Matrix(rw)->set macauthentication portreauthentication ge.2.1-5
To Next Page
Loading...
