Process Overview: Port Configuration
Port String Syntax Used in the CLI
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-5
4.2 PROCESS OVERVIEW: PORT CONFIGURATION
Use the following steps as a guide to configuring console and switch ports on the device:
1. Reviewing and setting console port properties (Section 4.3.1)
2. Reviewing switch port status (Section 4.3.2)
3. Disabling / enabling and naming switch ports (Section 4.3.3)
4. Setting switch port speed and duplex mode (Section 4.3.4)
5. Enabling / disabling jumbo frame support (Section 4.3.5)
6. Setting auto negotiation and advertised ability (Section 4.3.6)
7. Setting flow control (Section 4.3.7)
8. Configuring link traps and link flap detection (Section 4.3.8)
9. Configuring broadcast suppression (Section 4.3.9)
10.Setting port mirroring (Section 4.4.4)
11.Configuring link aggregation (Section 4.5.4)
To Next Page
Loading...
Need help?
General