Enterasys Matrix 2G4072-52 - Clear Igmp Protocols

IGMP Configuration Command Set
Configuring IGMP
10-24 Matrix DFE-Platinum and Diamond Series Configuration Guide
10.4.2.15 clear igmp protocols
Use this command to clear the binding of IP protocol id to IGMP classification
clear igmp protocols [protocol-id protocol-id]
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear IGMP protocols for protocol id 3:
protocol-id
protocol-id
The protocol ids to change(0-255).
Matrix(rw)->clear igmp protocols protocol-id 3