Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-67
14.3.6.12 set pwa enhancedmode
Use this command to enable or disable PWA enhanced mode. When enabled, users on
unauthenticated PWA ports can type any URL into a browser and be presented the PWA login page
on their initial web access. They will also be granted guest networking privileges.
set pwa enhancedmode {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable PWA enhanced mode:
enable | disable Enables or disables PWA enhanced mode.
Matrix(rw)->set pwa enhancedmode enable
To Next Page
Loading...
