Enterasys Matrix 2G4072-52 - Show Multiauth Port

Security Configuration Command Set
Configuring Multiple Authentication
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-139
14.3.10.5 show multiauth port
Use this command to display multiple authentication properties for one or more ports.
show multiauth port [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, multiple authentication information will be displayed
for all ports.
Example
This example shows how to display multiple authentication information for ports fe.1.1-4:
port-string (Optional) Displays multiple authentication information for
specific port(s).
Matrix(rw)->show multiauth port fe.1.1-4
Port Mode Max Allowed Current
users users users
------------ ------------- ---------- ---------- ----------
fe.1.1 auth-opt 128 128 0
fe.1.2 auth-opt 128 128 0
fe.1.3 auth-opt 128 128 0
fe.1.4 auth-opt 128 128 0