Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-75
6.2.1.62 show spantree spanguardtrapenable
Use this command to displays the state of the Spanning Tree span guard trap function.
show spantree spanguardtrapenable
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the state of the span guard trap function:
Matrix(rw)->show spantree spanguardtrapenable
Span Guard Trap is set to enable
To Next Page
Loading...
