Port Configuration Command Set
Setting Console Port Properties
4-8 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.1.2 clear console
Use this command to clear the properties set for one or more console ports.
clear console [port-string]
Syntax Description
Command Defaults
If port-string is not specified, properties for all console ports will be cleared.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to clear properties for console port com.1.1:
port-string (Optional) Clears properties for specific console port(s).
Matrix(rw)->clear console com.1.1
To Next Page
Loading...
