Enterasys Matrix 2G4072-52 - Clear Spantree Maxage

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-48 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.35 clear spantree maxage
Use this command to reset the maximum aging time for a Spanning Tree to the default value of 20
seconds.
clear spantree maxage
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to globally reset the maximum aging time:
Matrix(rw)->clear spantree maxage