IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-75
12.2.8.1 show ip slb serverfarms
Use this command to display server load balancing server farm information.
show ip slb serverfarms [detail | serverfarmname [detail]]
Syntax Description
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
If detail is not specified, summary information about all configured server farms
will be displayed.
Example
This example shows how to display LSNAT server farm summary information:
detail (Optional) Displays detailed output for a specific server
farm or for all configured server farms.
serverfarmname Specifies a server farm name for which to display
information.
Matrix Router1(config)#>show ip slb serverfarms
server-farm predictor status rserver rserver
------------------------------------------------------------------------------
matrix LEASTCONNECTION ACTIVE 2 2
ftpserver ROUNDROBIN ACTIVE 2 2
ten ROUNDROBIN ACTIVE 3 3
big ROUNDROBIN ACTIVE 1 1
To Next Page
Loading...
Need help?
General