Enterasys Matrix 2G4072-52 - Clear Lldp Port Trap

Discovery Protocols Command Set
Link Layer Discovery Protocol and LLDP-MED
3-58 Matrix DFE-Platinum and Diamond Series Configuration Guide
3.2.4.21 clear lldp port trap
Use this command to return the port LLDP trap setting to the default value of disabled.
clear lldp port trap port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-write.
Example
This example returns port ge.1.1 to the default LLDP trap state of disabled.
port-string Specifies the port or range of ports to be affected.
Matrix(rw)->clear lldp port trap ge.1.1