Enterasys Matrix 2G4072-52 User Manual

SNMP Configuration Command Set
Configuring SNMP Notification Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 5-61
5.3.7.7 show snmp notifyprofile
Use this command to display SNMP notify profile information. This associates target parameters to
an SNMP notify filter to determine who should not receive SNMP notifications.
show snmp notifyprofile [profile] [targetparam targetparam] [volatile |
nonvolatile | read-only]
Syntax Description
Command Defaults
If no parameters are specified, all notify profile information will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display SNMP notify information for the profile named “area51”:
profile (Optional) Displays a specific notify profile.
targetparam
targetparam
(Optional) Displays entries for a specific target
parameter.
volatile |
nonvolatile |
read-only
(Optional) Displays notify filter entries of a specific
storage type.
Matrix(rw)->show snmp notifyprofile area51
--- SNMP notifyProfile information ---
Notify Profile = area51
TargetParam = v3ExampleParams
Storage type = nonVolatile
Row status = active

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English