Port Configuration Command Set
Setting Console Port Properties
4-20 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.1.14 clear console stopbits
Use this command to clear the stop bits per character for one or more console ports.
clear console stopbits [port-string]
Syntax Description
Command Defaults
If port-string is not specified, stop bits per character will be cleared for all console
ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear stop bits per character for console port com.1.1:
port-string (Optional) Clears stop bits for specific console port(s).
Matrix(rw)->clear console stopbits com.1.1
To Next Page
Loading...
