Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-51
8.3.2.14 clear policy usage-list
Use this command to clear usage statistics for ports disabled by first rule usage. To become active
again, disabled ports must also be removed from the policy disabled-ports list as described in
Section 8.3.2.13.
clear policy usage-list [all] | [admin-profile] | profile-index {ether | icmptype |
ipproto | ipdest | ipdestsocket | ipfrag | ipsource | ipsourcesocket | iptos |
ipxclass | ipxdest | ipxsource | ipxdestsocket | ipxsourcesocket | ipxtype |
llcDsapSsap | macdest | macsource | port | tci | tcpdestport | tcpsourceport |
udpdestport | udpsourceport | vlantag} [data] [mask mask] [port-string
port-string] [port-list port-list]
Syntax Description
all | admin-profile |
profile-index
Clears all usage statistics, those associated with an
administrative profile rule, or those associated with a
specific profile rule. Valid profile-index values are 1 -
1023.
ether Clears Ethernet II rule usage statistics.
icmptype Clears ICMP rule usage list statistics.
ipproto Clears IP protocol rule usage statistics.
ipdest Clears IP destination address rule usage statistics.
ipdestsocket Clears IP destination socket rule usage statistics.
ipfrag Clears IP fragmentation rule usage statistics.
ipsource Clears source address rule usage statistics.
ipsourcesocket Clears source socket rule usage statistics.
iptos Clears IP Type of Service rule usage statistics.
ipxclass Clears IPX transmission control rule usage statistics.
ipxdest Clears IPX destination address rule usage statistics.
ipxsource Clears IPX source address rule usage statistics.
ipxdestsocket Clears IPX destination socket rule usage statistics.
ipxsourcesocket Clears IPX source socket rule usage statistics.
ipxtype Clears IPX packet type rule usage statistics.
llcDsapSsap Clears DSAP/SSAP rule usage statistics.
To Next Page
Loading...
Need help?
General