Enterasys Matrix 2G4072-52 - Security Configuration Command Set; Setting the Authentication Login Method

Security Configuration Command Set
Setting the Authentication Login Method
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-5
14.3 SECURITY CONFIGURATION COMMAND SET
14.3.1 Setting the Authentication Login Method
Purpose
To configure the authentication login method.
Commands
The commands used to configure the authentication login method are listed below and described in
the associated section as shown:
• show authentication login (Section 14.3.1.1)
• set authentication login (Section 14.3.1.2)
• clear authentication login (Section 14.3.1.3)