General Configuration Command Set
Resetting the Device
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-151
2.2.12.1 show reset
Use this command to display information about scheduled device resets.
show reset
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This command shows how to display reset information
Matrix(rw)->show reset
Reset scheduled for Fri Jan 21 2000, 23:00:00 (in 3 days 12 hours 56 minutes 57
seconds).
Reset reason: Software upgrade
To Next Page
Loading...
