VLAN Configuration Command Set
Creating and Naming Static VLANs
Matrix DFE-Platinum and Diamond Series Configuration Guide 7-9
7.3.2.3 clear vlan
Use this command to remove a static VLAN from the list of VLANs recognized by the device.
clear vlan vlan-list
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to remove a static VLAN 9 from the device’s VLAN list:
vlan-list Specifies the VLAN ID of the VLAN(s) to be removed.
Matrix(rw)->clear vlan 9
To Next Page
Loading...
