Enterasys Matrix 2G4072-52 - Logging and Network Management; Process Overview: Network Management

Matrix DFE-Platinum and Diamond Series Configuration Guide 11-1
11
Logging and Network Management
This chapter describes switch-related logging and network management commands and how to use
them.
11.1 PROCESS OVERVIEW: NETWORK MANAGEMENT
Switch-related network management tasks include the following:
• Configuring System Logging (Section 11.2.1)
• Monitoring Network Events and Status (Section 11.2.2)
• Configuring SMON (Section 11.2.3)
• Configuring RMON (Section 11.2.4)
• Managing Network Addresses and Routes (Section 11.2.5)
• Configuring SNTP (Section 11.2.6)
• Configuring Node Aliases (Section 11.2.7)
• Configuring NetFlow (Section 11.2.8)
NOTE: The commands in this section pertain to network management of the Matrix
Series device from the
switch CLI only. For information on router-related network
management tasks, including reviewing router ARP tables and IP traffic, refer to
Chapter 12.