Configuring LACP
Configuring Link Aggregation
4-126 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.5.4.20 clear lacp outportAlgorithm
Use this command to reset LACP to DIP-SIP, its default outport algorithm.
clear lacp outportAlgorithm
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the LACP outport algorithm to DIP-SIP:
Matrix(rw)->clear lacp outportAlgorithm
To Next Page
Loading...
Need help?
General