Security Configuration Command Set
Configuring MAC Locking
14-126 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.9.6 set maclock firstarrival
Use this command to restrict MAC locking on a port to a maximum number of end station addresses
first connected to that port.
set maclock firstarrival port_string value
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to restrict MAC locking to 6 MAC addresses on fe.2.3:
port_string Specifies the port on which to limit MAC locking. For a
detailed description of possible port_string values, refer
to Section 4.1.1.
value Specifies the number of first arrival end station MAC
addresses to be allowed connections to the port. Valid
values are 0 to 600.
Matrix(rw)->set maclock firstarrival fe.2.3 6
To Next Page
Loading...
Need help?
General