General Configuration Command Set
Setting Basic Device Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-87
2.2.3.35 clear physical alias
Use this command to reset the alias for a physical object to a zero-length string.
clear physical alias {[chassis] [slot slot] [backplane backplane] [module
module] [powersupply powersupply] [powersupply-slot powersupply-slot] [fan]
[fan-slot] [port-string port-string]}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set clear the alias set for the chassis:
chassis Clears the chassis alias.
slot slot Clears and alias for a specific slot.
backplane
backplane
Clears and alias for a specific backplane. Valid values are
1 for FTM 1 and 2 for FTM 2.
module module Clears an alias for a specific module.
powersupply
powersupply
Clears an alias for a specific power supply. Valid values
are 1 or 2.
fan Clears the fan tray alias
port-string
port-string
Clears an alias for a specific port.
Matrix(rw)->clear physical alias chassis