Security Configuration Command Set
Configuring MAC Authentication
14-100 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.7.19 clear macauthentication quietperiod
Use this command to clear the macauthentication quiet period on one or more ports to the default
value. The default value is 0 (never).
clear macauthentication quietperiod [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None
Example
This example shows how to clear the macauthentication quietperiod for port ge.1.1
:
port-string (Optional) Clears the macauthentication quiet period on
specific port(s). For a detailed description of possible
port-string values, refer to Section 4.1.1.
Matrix(rw)->clear macauthentication quietperiod ge.1.1
To Next Page
Loading...
