Enterasys Matrix 2G4072-52 - Show Cos Unit

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-65
8.3.3.4 show cos unit
Use this command to display Class of Service units of measure information, including rate type,
minimum and maximum limits of the port groups, and their respective granularity.
show cos unit [irl | txq] [port-type index] [percentage | kbps | mbps | gbps]
Syntax Description
Command Defaults
If not specified, all rate limiting information for all port types and CoS units of
measure will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to show all Class of Service IRL unit of measure information:
irl | txq (Optional) Displays inbound rate limiting or transmit
queue information.
port-type index (Optional) Displays information for a specific port type.
percentage | kbps |
mbps | gbps
Displays the unit of measure as percentage of total
bandwidth, or kilobits, megabits, or gigabits per second.
Matrix(rw)->show cos unit irl
Port Type Type Unit Maximum Rate Minimum Rate Granularity
--------- ---- ---- ------------ ------------ -----------
0 irl Gbps 10 1 1
0 irl Mbps 10000 1 1
0 irl Kbps 10000000 512 1
0 irl perc 100 1 1
1 irl Gbps 10 1 1
1 irl Mbps 10000 1 1
1 irl Kbps 10000000 5121
1 irl perc 100 1 1