Enterasys Matrix 2G4072-52 - Page 708

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
8-64 Matrix DFE-Platinum and Diamond Series Configuration Guide
Table 8-5 provides an explanation of the command output.
Numb
Table 8-5 show cos port-type Output Details
Output What It Displays...
Index Port type index. Port type 0 designates the Matrix Platinum
Series 7G4270-12 module, and port type 1 designates all
other modules.
Port type
description
Resource-specific text description of the port type. Default
names are:
• DFE-P 16Q for port type 0 TXQ (Applies to
DFE-Platinum chassis-based systems only)
• DFE-P or DFE-G 4Q for port type 1 TXQ
• DFE-P 32 IRL for port type 0 IRL (Applies to
DFE-Platinum chassis-based systems only)
• DFE-P or DFE-G 8 IRL for port type 1 IRL
Number of slices /
Number of queues
The total number of slices of transmit resources that can be
divided among port queues, and the total number of queues
available. Default port type 0 (the Matrix Platinum Series
7G4270-12 module) allows 64 slices for 16 queues. Default
port type 1 (all other modules) allows 32 slices for 4
queues.
Number of
limiters
Maximum number of inbound rate limiters configurable for
each port type. When configured for IRL, default port type
0 (the Matrix Platinum Series 7G4270-12 module) allows
for 32, and default port type 1 (all other modules) allows for
8.
Supported rate
types
Unit of measure supported by the port type.
Eligible ports Which device ports meet this port type criteria.
Unselected ports Which ports have not been assigned user-defined port
configuration settings,