Security Configuration Command Set
Configuring MAC Authentication
14-98 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.7.17 clear macauthentication reauthperiod
Use this command to clear the MAC reauthentication period on one or more ports.
clear macauthentication reauthperiod [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If port-string is not specified, the reauthentication period will be cleared on all
ports.
Example
This example shows how to globally clear the MAC reauthentication period:
port-string (Optional) Clears the MAC reauthentication period on
specific port(s). For a detailed description of possible
port-string values, refer to Section 4.1.1.
Matrix(rw)->clear macauthentication reauthperiod
To Next Page
Loading...
Need help?
General