Port Configuration Command Set
Setting Auto-Negotiation and Advertised Ability
4-56 Matrix DFE-Platinum and Diamond Series Configuration Guide
4.3.6.5 clear port mdix
Use this command to reset MDIX mode to the default setting of auto on one or more ports.
clear port mdix [port-string]
Syntax Description
Command Defaults
If port-string is not specified, mode will be reset for all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset 1-Gigabit Ethernet port 14 in module 3 to auto MDI/MDIX
configuration:
port-string (Optional) Resets mode for specific port(s). For a detailed
description of possible port-string values, refer to
Section 4.1.1.
Matrix(rw)->set port mdix ge.3.14
To Next Page
Loading...
Need help?
General