Enterasys Matrix 2G4072-52 - Configuring SMON

Logging And Network Management Command Set
Configuring SMON
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-37
11.2.3 Configuring SMON
Purpose
To configure SMON (Switched Network Monitoring) on the device.
Commands
Commands to configure SMON are listed below and described in the associated section as shown.
• show smon priority (Section 11.2.3.1)
• set smon priority (Section 11.2.3.2)
• clear smon priority (Section 11.2.3.3)
• show smon vlan (Section 11.2.3.4)
• set smon vlan (Section 11.2.3.5)
• clear smon vlan (Section 11.2.3.6)