Enterasys Matrix 2G4072-52 - Set Cos State

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-61
8.3.3.2 set cos state
Use this command to enable or disable Class of Service.
set cos state{enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable Class of Service:
enable | disable Enables or disables Class of Servic.e
Matrix(rw)->set cos state enable