Enterasys Matrix 2G4072-52 - Show Snmp Group

SNMP Configuration Command Set
Configuring SNMP Users, Groups and Communities
5-18 Matrix DFE-Platinum and Diamond Series Configuration Guide
5.3.2.4 show snmp group
Use this command to display an SNMP group configuration. An SNMP group is a collection of
SNMPv3 users who share the same access privileges.
show snmp group [groupname groupname] [user user] [security-model {v1 |
v2c | usm}] [volatile | nonvolatile | read-only]
Syntax Description
Command Defaults
• If groupname is not specified, information about all SNMP groups will be
displayed.
• If user is not specified, information about all SNMP users will be displayed.
• If security-model is not specified, user information about all SNMP versions
will be displayed.
• If not specified, information for all storage types will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
groupname
groupname
(Optional) Displays information for a specific SNMP
group.
user user (Optional) Displays information about users within the
specified group.
security-model v1 |
v2c | usm
(Optional) Displays information about groups assigned to
a specific security SNMP model.
volatile |
nonvolatile |
read-only
(Optional) Displays SNMP group information for a
specified storage type.