SNMP Configuration Command Set
Configuring SNMP Users, Groups and Communities
Matrix DFE-Platinum and Diamond Series Configuration Guide 5-19
Example
This example shows how to display SNMP group information:
Table 5-5 shows a detailed explanation of the command output.
Matrix(rw)->show snmp group
--- SNMP group information ---
Security model = SNMPv1
Security/user name = public
Group name = Anyone
Storage type = nonVolatile
Row status = active
Security model = SNMPv1
Security/user name = public.router1
Group name = Anyone
Storage type = nonVolatile
Row status = active
Table 5-5 show snmp group Output Details
Output What It Displays...
Security model SNMP version associated with this group.
Security/user name User belonging to the SNMP group.
Group name Name of SNMP group.
Storage type Whether entry is stored in volatile, nonvolatile or
read-only memory.
Row status Status of this entry: active, notInService, or
notReady.
To Next Page
Loading...
