SNMP Configuration Command Set
Configuring SNMP Users, Groups and Communities
Matrix DFE-Platinum and Diamond Series Configuration Guide 5-21
5.3.2.6 clear snmp group
Use this command to clear SNMP group settings globally or for a specific SNMP group and user.
clear snmp group groupname user [security-model {v1 | v2c | usm}]
Syntax Description
Command Defaults
If not specified, settings related to all security models will be cleared.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all settings assigned to the “public” user within the SNMP group
“anyone”:
groupname Specifies the SNMP group to be cleared.
user Specifies the SNMP user to be cleared.
security-model v1 |
v2c | usm
(Optional) Clears the settings associated with a specific
security model.
Matrix(rw)->clear snmp group anyone public
To Next Page
Loading...
