Enterasys Matrix 2G4072-52 User Manual

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-52 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.39 show spantree autoedge
Use this command to display the status of automatic edge port detection.
show spantree autoedge
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the status of the automatic edge port detection function:
Matrix(rw)->show spantree autoedge
autoEdge is currently enabled.

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English