Enterasys Matrix 2G4072-52 - Clear Policy Autoclear

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
Matrix DFE-Platinum and Diamond Series Configuration Guide 8-55
8.3.2.17 clear policy autoclear
Use this command to clear policy rule auto clear settings.
clear policy autoclear {all | link [interval | profile | ports]}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all policy auto clear settings:
all Clears all auto clear settings .
link Clears rule usage when a link’s operating status of up is
detected.
interval (Optional) Clears the interval setting.
profile (Optional) Clears the profile setting.
ports (Optional) Clears the assigned port-list.
Matrix((rw)->clear policy autoclear all