IGMP Configuration Command Set
Configuring IGMP
10-10 Matrix DFE-Platinum and Diamond Series Configuration Guide
10.4.2.3 set igmp query-disable
Use this command to disable IGMP querying on one or more VLANs.
set igmp query-disable vlan-list
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to disable IGMP querying on VLAN 104:
vlan-list Specifies the VLAN(s) on which to disable IGMP
querying.
Matrix(rw)->set igmp query-disable 104
To Next Page
Loading...
