IP Configuration Command Set
Configuring PIM
12-64 Matrix DFE-Platinum and Diamond Series Configuration Guide
12.2.7.10 show ip pim rp-hash
Use this command to display the rendezvous point (RP) that is being selected for a specified group.
show ip pim rp-hash group-address
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router1#
Command Defaults
None.
Example
This example shows how to display RP hash information:
group-address Displays information about a specific group address.
Matrix>Router1#show ip pim rp-hash
RP 192.168.41.1, via Bootstrap Router, uptime 07:50:10, expires 00:01:52
To Next Page
Loading...
Need help?
General