IP Configuration Command Set
Configuring PIM
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-63
Table 12-7 provides an explanation of the command output.
Table 12-7 show ip pim rp Output Details
Output What It Displays...
Group(s) Address of the multicast group(s) about which to display RP
data.
RP Address of the RP for that group.
Priority RP priority value.
Expiry Period (in hours:minutes:seconds) in which the next
bootstrap message is due from this BSR.
Uptime Interval that this router has been up in
hours:minutes:seconds.
To Next Page
Loading...
Need help?
General