Enterasys Matrix 2G4072-52 User Manual

Logging And Network Management Command Set
Configuring RMON
11-44 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.4 Configuring RMON
RMON Monitoring Group Functions and Commands
RMON (Remote Network Monitoring) provides comprehensive network fault diagnosis, planning,
and performance tuning information and allows for interoperability between SNMP management
stations and monitoring agents. RMON extends the SNMP MIB capability by defining additional
MIBs that generate a much richer set of data about network usage.
These MIB “groups” each gather
specific sets of data to meet common network monitoring requirements.
Table 11-5 lists the RMON monitoring groups supported on Matrix Series devices, each group’s
function and the elements it monitors, and the associated configuration commands needed.
Table 11-5 RMON Monitoring Group Functions and Commands
RMON
Group
What It Does... What It Monitors... CLI Command(s)
Statistics Records statistics
measured by the RMON
probe for each monitored
interface on the device.
Packets dropped, packets
sent, bytes sent (octets),
broadcast and multicast
packets, CRC errors,
oversized and undersized
packets, fragments,
jabbers, and counters for
packets.
show rmon stats
(Section 11.2.4.1)
set rmon stats
(Section 11.2.4.2)
clear rmon stats
(Section 11.2.4.3)
History Records periodic
statistical samples from a
network.
Sample period, number of
samples and item(s)
sampled.
show rmon history
(Section 11.2.4.4)
set rmon history
(Section 11.2.4.5)
clear rmon history
(Section 11.2.4.6)

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English