VLAN Configuration Command Set
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
7-22 Matrix DFE-Platinum and Diamond Series Configuration Guide
7.3.3.9 show vlan constraint
Use this command to display constraint settings for one or more VLAN’s. Constraints determine
which VLANs belong to which Filter Databases (FIDs).
show vlan constraint [vlan-list]
Syntax Description
Command Defaults
If vlan-list is not specified, settings for all VLANs will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the constraint settings for VLAN 1:
Table 7-3 provides an explanation of the command output.
vlan-list (Optional) Displays constraint settings for specific
VLAN(s).
Matrix(rw)->show vlan constraint 1
VLAN ID VLAN SET VLAN SET TYPE
1 100 Shared
2 2 Shared
3 300 Shared
4 400 Shared
101 2 Shared
102 2 Shared
103 2 Shared
Table 7-3 show vlan constraint Output Details
Output What It Displays...
VLAN ID Number identifying the VLAN.