Security Configuration Command Set
Configuring MAC Locking
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-127
14.3.9.7 set maclock move
Use this command to move all current first arrival MACs to static entries.
set maclock move port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to move all current first arrival MACs to static entries on fe.1.3:
port-string Specifies the port where all current first arrival MACs
will be moved to static entries. For a detailed description
of possible port_string values, refer to Section 4.1.1.
Matrix(rw)->set maclock move fe.1.3
To Next Page
Loading...
