IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
Matrix DFE-Platinum and Diamond Series Configuration Guide 12-103
12.2.8.21 show ip slb conns
Use this command to display active server load balancing connections.
show ip slb conns [detail | vserver virtualserver [detail] | client client-ip [detail]]
Syntax Description
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
If no parameters are specified, summary information about all active connections
will be displayed.
If detail is not specified, summary information will be displayed.
Examples
This example shows how to display summary information about active server load balancing
connections:
detail (Optional) Displays detailed output for a specific virtual
server, a specific client, or for all configured virtual servers
and clients.
vserver
virtualserver
(Optional) Specifies a virtual server name for which to
display information.
client client-ip (Optional) Specifies a client IP for which to display
information.
Matrix>Router1#show ip slb conns
flo-id real-server-ip client-ip rport cl-prt ptcl state
-----------------------------------------------------------------
7 192.169.1.10 192.168.1.137 23 1063 TCP OUT-SERVR REPLY
6 192.169.2.13 192.168.1.137 1128 * TCP OUT-SERVR REPLY
5 192.169.2.13 192.168.1.137 21 * TCP OUT-SERVR REPLY
3 192.169.2.14 192.168.1.253 1084 * TCP OUT-SERVR REPLY
2 192.169.2.14 192.168.1.253 21 * TCP OUT-SERVR REPLY
1 192.169.1.11 192.168.1.253 23 1249 TCP OUT-SERVR REPLY
To Next Page
Loading...
Need help?
General