Enterasys Matrix 2G4072-52 - Set Macauthentication

Security Configuration Command Set
Configuring MAC Authentication
14-84 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.7.3 set macauthentication
Use this command to globally enable or disable MAC authentication.
set macauthentication {enable | disable}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Examples
This example shows how to globally enable MAC authentication:
enable | disable Globally enables or disables MAC authentication.
Matrix(rw)->set macauthentication enable