Security Configuration Command Set
Configuring TACACS+
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-27
14.3.4.2 set tacacs
Use this command to enable or disable the TACACS+ client.
set tacacs {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Usage
The TACACS+ client can be enabled on the switch anytime, with or without a
TACACS+ server online. If the TACACS+ server is offline and TACACS+ is
enabled, the login authentication is switched to RADIUS or local, if enabled.
Examples
This example shows how to enable the TACACS+ client.
enable | disable Enables or disables the TACACS client.
Matrix(rw)->set tacacs enable
To Next Page
Loading...
