Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6-106 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.2.14 clear spantree porthello
Use this command to reset the hello time for one or more Spanning Tree ports to the default of 2
seconds.
clear spantree porthello port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the hello time to 2 seconds for port fe.1.4:
port-string Specifies the port(s) for which to reset hello time.
Matrix(rw)->clear spantree porthello fe.1.4
To Next Page
Loading...
Need help?
General