Enterasys Matrix 2G4072-52 - Clear Snmp Notify

SNMP Configuration Command Set
Configuring SNMP Notification Parameters
5-56 Matrix DFE-Platinum and Diamond Series Configuration Guide
5.3.7.3 clear snmp notify
Use this command to clear an SNMP notify configuration.
clear snmp notify notify
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear the SNMP notify configuration for “hello”:
notify Specifies an SNMP notify name to clear.
Matrix(rw)->clear snmp notify hello