SNMP Configuration Command Set
Configuring SNMP Notification Parameters
5-60 Matrix DFE-Platinum and Diamond Series Configuration Guide
5.3.7.6 clear snmp notifyfilter
Use this command to delete an SNMP notify filter configuration.
clear snmp notifyfilter profile subtree oid-or-mibobject
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to delete the SNMP notify filter “pilot1”:
profile Specifies an SNMP filter notify name to delete.
subtree
oid-or-mibobject
Specifies a MIB subtree ID containing the filter to be
deleted.
Matrix(rw)->clear snmp notifyfilter pilot1 subtree 1.3.6
To Next Page
Loading...
