Enterasys Matrix 2G4072-52 User Manual

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
8-60 Matrix DFE-Platinum and Diamond Series Configuration Guide
8.3.3.1 show cos state
Use this command to display the Class of Service enable state.
show cos state
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to show the Class of Service enable state:
Matrix(rw)->show cos state
Class-of-Service application is enabled

Enterasys Matrix 2G4072-52 Specifications

General

Brand	Enterasys
Model	Matrix 2G4072-52
Category	Switch
Language	English