Logging And Network Management Command Set
Configuring Node Aliases
11-150 Matrix DFE-Platinum and Diamond Series Configuration Guide
11.2.7.7 clear nodealias
Use this command to remove one or more node alias entries.
clear nodealias {port-string port-string | alias-id alias-id}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear all node alias entries on fe.1.3
:
port-string
port-string
Specifies the port(s) on which to remove all node alias
entries. For a detailed description of possible port-string
values, refer to Section 4.1.1.
alias-id alias-id Specifies the ID of the node alias to remove. This value can
be viewed using the show nodealias command as described
in Section 11.2.7.1.
Matrix(rw)->clear nodealias port-string fe.1.3
To Next Page
Loading...
Need help?
General