Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-68 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.6.13 set pwa guestname
Use this command to set a guest user name for PWA enhanced mode networking. When enhanced
mode is enabled (as described in Section 14.3.6.12), PWA will use this name to grant network
access to guests without established login names and passwords.
set pwa guestname name
Syntax Description
Command Type
Switch command.
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the PWA guest user name to “guestuser”:
name Specifies a guest user name.
Matrix(rw)->set pwa guestname guestuser
To Next Page
Loading...
