VLAN Configuration Command Set
Assigning Port VLAN IDs (PVIDs) and Ingress Filtering
Matrix DFE-Platinum and Diamond Series Configuration Guide 7-25
7.3.3.11 clear vlan constraint
Use this command to clear a constraint applied to a VLAN.
clear vlan constraint vlan-list set-num
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear constraint 3 from VLAN 1:
vlan-list Specifies the VLAN(s) for which to clear the constraint.
set-num Specifies the constraint set ID to be cleared.
Matrix(rw)->clear vlan constraint 1 3
To Next Page
Loading...
