Enterasys Matrix 2G4072-52 - Show Flowlimit

Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-190 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.15.1 show flowlimit
Use this command to display flow setup throttling information.
show flowlimit [port [port-string]] [stats [port-string]]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no optional parameters are specified, detailed flow limiting information will be
displayed for all ports.
Example
This example shows how to display flow limiting information for Fast Ethernet port 1 in module 2.
In this case, it is enabled for FST with an “unspecified” port classification, is currently operational,
and has no FST action assigned:
port port-string (Optional) Displays flow limiting port settings for one or
all ports.
stats port-string (Optional) Displays flow limiting statistics for one or all
ports.
Matrix(rw)->show flowlimit limit port fe.2.1
Flow setup throttling port configuration:
Port Class State Status Reason Layer
--------- ------------------ -------- --------------------- ---------- -----
fe.2.1 unspecified enabled operational noAction L4